Sold Out
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. The pot life of Mold Star 15 SLOW is 50 minutes and cure time is 4 hours at room temperature.
Each kit contains 1 pint of part A and 1 pint of part B
Note: This product will not cure against surfaces containing sulfur, even when sealed.
• Also available in a case (4 kits)
FOR OFFICIAL MSDS SHEET CLICK HERE
| Specific Gravity | 1.18 g/cc |
| Specific Volume | 23.5 cu. in./lb. |
| Pot Life | 50 minutes |
| Cure Time | 4 hours |
| Shore Hardness | 15 A |
| Tensile Strength | 400 psi |
| 100% Modulus | 55 psi |
| Elongation @ Break | 440 % |
| Die B Tear Strength | 88 pli |
| Color | Green |
| Mix Ratio By Volume | 1A:1B |
| Shrinkage | <.001 in. / in. |
| Useful Temperature (min) | -65 °F |
| Useful Temperature (max) | 450 °F |
| Mix Ratio By Weight | 1A:1B |
| Mixed Viscosity | 12,500 cps |
Sold Out
Looking for a ready made female form base on which to sculpt or display your...
Sold Out
Looking for a ready made base on which to sculpt or display your masks? Well,...
Sold Out
Gypsona® Plaster Bandages remain the industry standard for making a fast, strong support shell specially in...
